Irregularity of rubber joints
Source:
|
Author:佚名
|
Published time: 2020-10-14
|
949 Views
|
Share:
In the sales process, some customers often purchase products according to the model of rubber joints. Some models are very biased and cannot be found at all. The same product with different names and models will cause audiovisual confusion to customers, and they don’t know the corresponding What kind of product the model corresponds to, the purchase difficulty of customers will also increase a lot. At present, the names of rubber joints on the market include: rubber joints, rubber soft joints, flexible rubber joints, rubber soft connections, shock absorbers, pipeline shock absorbers, steel flexible tubes, rubber corrugated connectors, stress relievers, etc. name. The types of rubber joints include JGD, KXT, KDF, GJQ(X)-DF, JGD-41, GD-1, RFGD, KXD, etc. The rubber joints are classified into: single-ball rubber joints, double-ball rubber joints, and double-ball wire joints. Rubber joints, clamp type rubber joints, reducing rubber joints, 90° rubber elbows, fan coil rubber joints, three-sphere rubber joints, water pump special rubber joints, etc. Rubber joint pressures are 0.25MPa (commonly known as 2.5 kg pressure), 0.6 MPa (commonly known as 0.6 kg pressure), 1.0 MPa (commonly known as 10 kg pressure), 1.6 MPa (commonly known as 16 kg pressure), 2.5 MPa (commonly known as 25 kg pressure), 4.0 MPa (commonly known as 40 kg pressure). In addition, the joints on the domestic market are divided into national standard, non-standard, near-standard, forged, and cast flanges. The prices of different products are also different. Customers should distinguish the corresponding differences during the procurement process.
In the sales process, some customers often purchase products according to the model of rubber joints. Some models are very biased and cannot be found at all. The same product with different names and models will cause audiovisual confusion to customers, and they don’t know the corresponding What kind of product the model corresponds to, the purchase difficulty of customers will also increase a lot. At present, the names of rubber joints on the market include: rubber joints, rubber soft joints, flexible rubber joints, rubber soft connections, shock absorbers, pipeline shock absorbers, steel flexible tubes, rubber corrugated connectors, stress relievers, etc. name. The types of rubber joints include JGD, KXT, KDF, GJQ(X)-DF, JGD-41, GD-1, RFGD, KXD, etc. The rubber joints are classified into: single-ball rubber joints, double-ball rubber joints, and double-ball wire joints. Rubber joints, clamp type rubber joints, reducing rubber joints, 90° rubber elbows, fan coil rubber joints, three-sphere rubber joints, water pump special rubber joints, etc. Rubber joint pressures are 0.25MPa (commonly known as 2.5 kg pressure), 0.6 MPa (commonly known as 0.6 kg pressure), 1.0 MPa (commonly known as 10 kg pressure), 1.6 MPa (commonly known as 16 kg pressure), 2.5 MPa (commonly known as 25 kg pressure), 4.0 MPa (commonly known as 40 kg pressure). In addition, the joints on the domestic market are divided into national standard, non-standard, near-standard, forged, and cast flanges. The prices of different products are also different. Customers should distinguish the corresponding differences during the procurement process.